V5000 Heavy-Duty Racking · V5-1.
Photos from the Wong Lye Racking project archive. Every caption describes what is in the picture - no stock images, no client names.
Two-tier welded steel rack for cable drums built along an outdoor wall under a shed roof, with V-shaped cradle beams holding each drum on its side. Photos follow the job from base plates and uprights through assembly, painting and loading, with a before-and-after pair.
Two-tier welded steel rack under a shed roof holding cable drums on their sides in each baySteel base plate set on a concrete kerb ahead of the rack installationSteel base plate positioned on the concrete kerb where the rack will stand, installer alongsideWelded steel rack frame with uprights and beams erected along an outdoor wall under a shed roof, bays still emptyLong run of empty two-tier steel rack frame under a shed roof, uprights and beams in placeEmpty steel rack frame in a yard beside a wall, base plates set on the raised kerbSteel uprights welded to a base plate along the kerb, top beams in place, bays emptyRow of steel uprights on a base plate along the wall, seen from the yard, with timber pallets stacked beyondLong steel base plate laid along the concrete kerb before the uprights go upTwo-tier steel rack frame with red-oxide finish along an outdoor wall, bays emptySteel uprights and top beams on a base plate, with a spirit level checking an uprightSteel base plate laid along the kerb, drilled ready for the uprightsSteel base plate along the concrete kerb before the rack frame is erectedTwo-tier welded steel rack under a shed roof loaded with cable drums on their sidesCable drums stored two tiers high in a welded steel rack along an outdoor wallFront view of the two-tier steel rack with cable drums in each bay and a forklift alongsideClose view of cable drums resting on the upper tier of the welded steel rackCable drum sitting in a steel cradle beam on the upper tierRed-oxide steel base plate and welded uprights at the rack foundationTwo-tier steel cable-drum rack with a forklift and an empty drum in the yard in frontEnd view of the two-tier cable-drum rack with drums loaded on both tiersCable drum resting in the angled steel cradle of the rackCable drum seated in the V-shaped steel cradle beamCable drum flange resting in the V-shaped steel cradle beam of the rackCable drum flange resting in the V-shaped steel cradle beam of the red-oxide rackCable drum on the upper tier of the welded steel rack, seen from the front under the shed roofTwo-tier welded steel rack with cable drums loaded in each bay along the wallRed-oxide steel base plate and uprights at the foot of the rackDrum of cable seated on the steel cradle beam of the upper tierCable drum on the upper tier resting in the angled steel cradleClose view of a cable drum on the rack's upper tier cradle beamCable drums seated side by side on the upper tier of the steel rackEmpty upper-tier bay showing the V-shaped steel cradle beams that hold a drumV-shaped steel cradle beam welded across an empty upper-tier bayAngled steel cradle beam in an empty bay of the drum rackCable-drum rack along the wall under the shed roof with a forklift parked in frontTwo-tier steel cable-drum rack fully loaded with drums along an outdoor wall under a shed roofLoaded two-tier cable-drum rack with a forklift working at the far endRed-oxide painted steel base plate with anchor bolts and uprights at the rack foundationSteel rack frame in blue and red-oxide primer under construction along the wall, installers working at the baseRack uprights and top beams in blue primer over a red-oxide base frame, install in progressTwo-tier steel rack frame being assembled along the wall, installers at work in the yardFront view of the two-tier steel rack frame in blue and red-oxide primer, bays still emptyInstallers assembling the two-tier steel rack frame along the wall, with a pallet of parts on the groundAngled view of the two-tier rack frame under construction, installers checking the baseBlue-primed V-shaped cradle beam welded across an upper-tier bay, close viewV-shaped steel cradle beam in blue primer spanning an upper-tier bayBlue-primed uprights and cradle beams on the red-oxide base frame during paintingCable drum resting on a steel base frame set over a floor drain grating beside the wallCable drum on its side on a welded steel base frame along the wall, a trial fit before the rack goes upCable drum standing on the steel base frame with the drain channel in frontCable drum seated on a steel base frame in the yard, with more drums stored beyondCable drum on the low steel base frame along the wall, viewed along the runEmpty steel base frame for the drum rack laid along the wall and drain channelSteel base frame laid along the wall with a cable drum test-fitted at the far endCable drum resting in the steel base frame close up, drain grating behindTwo square-hollow steel uprights bolted to base plates on the concrete floor, beam not yet fittedSquare-hollow steel upright welded to a base plate and bolted to the floorSteel upright on a bolted base plate against the wallSingle steel upright standing on its base plate before the beams are fittedFirst uprights and top beam of the drum rack fitted along the wall, base plates bolted downSteel upright welded to a base plate with anchor bolts, close view at floor levelBase plate with anchor bolts under a square-hollow steel uprightCable drum on the ground beside the wall where the rack will be installedSingle steel goalpost frame of uprights and beam fitted along the wall, drums stored beyondInstaller and visitors on site beside the first upright frame of the drum rack, pallets stacked in the yardTwo steel upright frames fixed to the floor along the wall, awaiting the connecting beamsCable drum test-fitted on the steel base frame beside the drain channelCable drum standing on the steel base frame with the wall behindCable drum on the base frame along the wall, viewed along the drain channelUpright base plate bolted to the concrete floor, close viewSteel base plate set on the concrete kerb before the uprights are erectedCompleted two-tier welded steel rack in red-oxide finish holding cable drums under the shed roof, forklift at the endTwo-tier steel cable-drum rack along the wall with drums loaded on both tiersRed-oxide steel base plate and uprights at the foot of the finished rackCable drums of several sizes loaded on both tiers of the welded steel rackCable drum seated on the upper-tier steel cradle beam, close viewV-shaped steel cradle beam in an empty upper-tier bay, finished in red-oxidePainted steel base plate with anchor bolts under the rack uprightsAfter: two-tier steel rack along the wall fully loaded with cable drumsBefore: cable drums stored on low blue steel stands along the same wall before the rack was built
Portfolio photos represent the broader project archive of Wong Lye Pte Ltd and its regional partners across Asia. Some installations shown were completed outside Singapore. Singapore-specific references and BCA-licensed local case studies available on request — please message us for the Singapore project list.
