Selective, Drive-In, VNA, Cantilever and Mezzanine systems — designed, fabricated and installed for Singapore warehouses, factories and 3PL operations. Direct from the manufacturer. No middleman, no markups, no compromises on load rating.
"We sized our racks to the spec sheet — and lost two pallet positions per bay six months in."
Most warehouse racking failures don't come from cheap steel. They come from racking that was sold by a catalogue, not designed for the floor it's standing on.
The forklift turning radius is off by 200mm. The slab can't take the column load. The beam deflection is within spec but the pallet overhangs the back. The seismic bracing was skipped to save a few hundred dollars per upright.
We've spent two decades fixing other people's mistakes. So we do it the slow way the first time — a real site survey, a load calculation against your actual SKU mix, a layout that respects your forklift fleet, and steel rated for the work it's actually being asked to do.
Every warehouse has a different shape, a different SKU mix and a different operating tempo. We design across the full family of pallet racking systems — and we'll tell you which one is wrong for you before we tell you what we'd build.
The default for most warehouses. 100% pallet selectivity, optimal for varied SKU operations with frequent picking. Bay-by-bay configurability and the best balance of access vs. density.
Specs & load tables →Two-pallet-deep configuration that cuts aisle count and lifts density 30–40%. Pairs with reach trucks fitted with telescopic forks. Right when you have multiple pallets of the same SKU.
Specs & load tables →Last-in-first-out high-density storage. Forklifts drive into the rack lanes for placement and retrieval. Best for bulk same-SKU storage — cold rooms, beverages, raw materials.
Specs & load tables →Very Narrow Aisle systems paired with wire-guided or rail-guided VNA trucks. Cuts aisle widths to 1.6–1.8m and lifts pallet positions by 40–50%. Demands a flat-floor survey.
Specs & load tables →For long, awkward, oversized loads — pipes, timber, profiles, rolled steel. Single or double-sided, with arms rated to the actual load case rather than a catalogue maximum.
Specs & load tables →Engineered mezzanines to add a second working level inside an existing warehouse. Stair, gate, handrail and load-rating to BCA standards. Built around your fit-out, not the other way round.
Specs & load tables →Steel shelters, canopies and ancillary structures for industrial yards and loading bays. Fully fabricated and erected by our own crew — same standards as our racking systems.
Recent projects →BCA / SCDF submissions for mezzanines, shelters and structural racks — PE-stamped calculations, fire-safety plans and endorsement coordinated in-house. One quotation covers it all.
What's included →We don't just badge our racks "heavy-duty" and hope. Every system is specified against the worst-case pallet load you actually run — and we publish the deflection and safety factor we designed to.
Carton picking, retail back-of-house, parts bins. Boltless or rivet-lock construction. Powder-coated finish.
Hand-loaded pallets, light SKU storage, picking modules above selective. Bolted upright frames.
Full forklift pallet operations. Hot-rolled uprights, box-section beams, safety-pin engagement. Our most-installed tier.
Steel coils, machinery, drums, oversized 3PL pallets. Reinforced uprights with seismic bracing and floor-fix calculations.
No layouts drawn from a phone photo. No quotes without a load calculation. Every project moves through the same four steps — and we'll show you the working at every stage.
We measure your floor, check slab capacity, log forklift turning radii and audit your SKU and pallet mix. The honest constraints come out here.
2D and 3D layouts with bay-by-bay pallet positions, beam loads, aisle widths and traffic patterns. You see the trade-offs before steel is cut.
Cold-rolled and hot-rolled members fabricated in-house. Powder-coat finish in Wong Lye red & yellow. PSB-tested steel, traceable mill certs.
Our own install crew, never a sub-let. Floor-fix per the load calculation, anti-collision posts where the forklift path demands them, and a sign-off load test.
A selection of installations across logistics, F&B cold-chain, manufacturing and 3PL operators. Photos load from our project archive — full case studies on request.
Daily writing on racking design, warehouse layout and the things we wish more clients knew before they signed a quote.
Wong Lye Racking is the racking arm of Wong Lye Pte Ltd — the same Singapore family builder behind wonglye.com. We fabricate and install adjustable, high-quality industrial racking — Selective, Double-Deep, Drive-In, Narrow-Aisle, Heavy-Duty and Mezzanine systems — for warehouses, factories and 3PL operators across the island.
Every project moves through the same in-house team: from conception to design, fabrication, submission and final installation. We're set up to deliver the same level of care to a small workshop's tooling racks as we are to a 10,000-pallet logistics hub.
It's all the same family of trades — Wong Lye Pte Ltd handles BCA-licensed structural building works for landed homes, this racking division handles industrial storage, and our sister company Larry Contractors handles interior renovation. Different licences, same standards.
Wong Lye Racking is one of three offerings under Wong Lye Pte Ltd. If your project is bigger than racking — or smaller — one of our sister offerings will be the right call.
Heavy building works for landed homes — A&A, reconstruction, structural rebuilds, piling. The structural side of the family.
Visit wonglye.com →Direct renovation contractor — HDB, condo, landed, office, retail and F&B fit-outs. No interior designer middleman.
Visit contractors.com.sg →Tell us your floor area, ceiling height, forklift type and what you're storing. We'll come look, measure, and quote — properly.
Speak to Wong Lye on WhatsApp